Power Heads

The fleck control valve has two basic sets of components, the wetted surface components and the electrical logic that moves those wetted components.  All of the electrical side is mounted on a plate which is bolted to the brass valve body.  This plate with all  motors and gears is called the power head.  In the case of the 2850 or 2850S valve you have a single power head operating a single piston.   For years the power heads were hard wired (as shown in the picture) for a specific configuration, stand-alone unit, twin alternating, sequential regeneration etc.  These hard wired configurations are still available but advances in product development have introduced the digital control.  The newest is the SXT or NXT which contains all configurations in one timer.  The setup is menu driven on how you want the valve to operate.  The NXT can link as many as 4 tanks together for coordinated operation.  A power head change can give you the newest unit on the market.  The picture shows the 2850 time clock power head.

Email customercare@fleckvalves.com to Order Now!

The fleck control valve has two basic sets of components, the wetted surface components and the electrical logic that moves those wetted components.  All of the electrical side is mounted on a plate which is bolted to the brass valve body.  This plate with all of its motors and gears is called the power head.  In the case of the 2900 valve you have an upper and lower power head each operating its own piston.   For years the power heads were hard wired for a specific configuration, stand-alone unit, twin alternating, sequential regeneration etc.  These hard wired configurations are still available but advances in product development have introduced the digital control.  The newest is the NXT which contains all configurations in one timer.  The setup is menu driven on how you want the valve to operate.  The NXT can link as many as 4 tanks together coordinated operation.  A power head change can give you the newest features on the market.  The picture shows the 2900 digital NXT upper and lower power heads less covers, notice how void of wiring it is.

Email customercare@fleckvalves.com to Order Now!

The fleck control valve has two basic sets of components, the wetted surface components and the electrical logic that moves those wetted components.  All of the electrical side is mounted on a plate which is bolted to the brass valve body.  This plate with all of its motors and gears is called the power head.  In the case of the 2900 valve you have an upper and lower power head each operating its own piston.   For years the power heads were hard wired for a specific configuration, stand-alone unit, twin alternating, sequential regeneration etc.  These hard wired configurations are still available but advances in product development have introduced the digital control.  The newest is the NXT which contains all configurations in one timer.  The setup is menu driven on how you want the valve to operate.  The NXT can link as many as 4 tanks together coordinated operation.  A power head change can give you the newest features on the market.  The picture shows the 2900 digital NXT upper and lower power heads less covers, notice how void of wiring it is.

Email customercare@fleckvalves.com to Order Now!

The fleck control valve has two basic sets of components, the wetted surface components and the electrical logic that moves those wetted components.  All of the electrical side is mounted on a plate than that plate is bolted to the brass valve body.  That plate with all of its motors and gears is called the power-head.  In the case of the 3900 valve you have an upper and lower power-head because you have two drives with pistons.  For years the power-heads were hard wired for a specific configuration, stand-alone unit, twin alternating, sequential regeneration etc.  These hard wired configurations are still available but advances in product development have created the digital control.  The newest is the NXT which contains all configurations in one timer and all that is needed is for you to choose from the menu how you want the valve to operate.  A power head change can give you the newest unit on the market.  The picture of the 3150 NXT power-head above is the same as the 3900 upper; notice how void of wiring it is.

Email customercare@fleckvalves.com to Order Now!

The fleck control valve has two basic sets of components, the wetted surface components and the electrical logic that moves those wetted components.  All of the electrical side is mounted on a plate which is bolted to the brass valve body.  This plate with all  motors and gears is called the power-head.  In the case of the 9000 twin alternating or 9500 twin alternating  you have a single power head operating an upper and lower piston.   For years the power heads were hard wired mechanical heads as shown in the picture .  These hard wired configurations are still available but advances in product development have introduced the digital control.  The newest is the XT and SXT, see Fleck 3200 timers on the pull down menu under Fleck Control Products on the home page.  A digital power-head gives more information and up to the moment flow figures.

Email customercare@fleckvalves.com to Order Now!