|
| This web site is designed to be an engineering
tool as well as a resource for locating companies that service,
install, and sell Fleck Controls and Fleck Valve parts and
equipment. Model numbers as well as specifications will vary
slightly from one supplier to another. Not all items pictured on
this web site are available at all locations listed nor are all
items manufactured by Fleck Controls. Contact the individual
supplier in your area for their current information. |
| |
Model 2510 -
water conditioning control |
|
Valve Only Time clock |
- Fully adjustable 5 -
cycle top mount control delivers controlled upflow backwash,
downflow brining and slow rinse, rapid rinse, brine refill and
downflow service.
- Time-tested
hydraulically balanced piston, seal and spacer concept to pilot
service flow and regeneration.
- Non-corrosive, UV
resistant NORYL® construction.
- Excellent flow rates -
19 gpm continuous, 24 gpm peak.
- Backwash capacity
handles tanks up to 16" diameter for softener applications, 16"
diameter for filter applications.
- Choice of 7/12 day
clock, manual or meter initiated regeneration.
- No hard water bypass
piston available
|
Options
Bypass valve
Backwash filter
Meter initiated regeneration
Manual operation
Service valve operator
No hard water bypass piston Electronic timer
Environmental cover
90°
adapter coupling |
|
Valve
Specifications
|
| Valve
Material |
Noryl
|
|
Inlet/Outlet |
1" or
3/4" |
|
Cycles* |
{5}
|
|
Flow
rates (50 PSI Inlet) - Valve Alone
|
|
Continuous (15 PSI Drop) |
19
gpm |
| Peak
(25 PSI Drop) |
24
gpm |
| CV** |
5.0
|
|
Max.Backwash (25 PSI Drop) |
17
gpm |
|
Regeneration
|
|
Downflow/Upflow |
Downflow |
|
Adjustable |
Yes
|
| Time
Available |
164
minutes |
|
Meter
Information
|
| Meter
Accuracy Range |
.25 -
15 gpm +/- 5% |
| Meter
Capacity Range |
Standard: 125-2,125 gal.
Exendedt: 625-10,625 gal. |
|
Dimensions
|
|
Distributor Pilot |
1"
|
| Drain
Line |
1/2"
Q.C |
|
Brine Line |
3/8" |
|
Mounting Base |
2-1/2"-8 Straight Q.C |
|
Height from top of tank |
7-1/2"
|
| Tank Application - can regenerate/backwash the following |
|
Water
Softener |
6"-16" diameter (limited by maximum injector size |
|
Iron Filter
|
8"-16" diameter
(based on 10 gpm per sq. ft
|
|
Sediment Filter
|
8"-16" diameter
(based on 10 gpm per sq. ft
|
|
Carbon Filter
|
8"-16" diameter
(based on 10 gpm per sq. ft
|
|
Neutralizing
Filter
|
8"-16" diameter
(based on 10 gpm per sq. ft
|
|
Additional Information
|
|
Electrical Rating |
24v,110v,220v - 50 Hz, 60 Hz |
|
Pressure |
Hydrostatic: 300 PSI
Working: 20 - 125 PSI |
|
Temperature |
34° -
110° F |
**Cv-Flow rate of valve alone at 1 psi pressure drop
|
