|
| This web site is designed to be an engineering
tool as well as a resource for locating companies that service,
install, and sell Fleck Controls and Fleck Valve parts and
equipment. Model numbers as well as specifications will vary
slightly from one supplier to another. Not all items pictured on
this web site are available at all locations listed nor are all
items manufactured by Fleck Controls. Contact the individual
supplier in your area for their current information. |
| |
|
|
|
Sytemax
Timer
Product Features
-
Uses one to three valves in the system. All valves
are wired identically which minimizes inventory
necessary to cover all system types.
-
All system interlocks are handled through the
controller programming. Program can be modified at
any time without any valve rewiring.
-
There are two independently adjustable relay outputs
for each unit in the system. Each relay can be used
either as an output during the regeneration time
window or as a chemical pump output sending a
predetermined signal based on service flow.
-
Bright 8 digit VFD display with user panel layout
utilizing LED status/programming indicators.
-
All volume displays are in gallons or liters.
-
Totalizer
display, flow rate and peak flow rate displays are
provided for each meter in the system.
-
All electrical connections are made through
pre-wired interlock cables supplied with the
controller.
-
All cables exit the controller enclosure via
watertight connectors and sealite flexible conduit
with 19 pin connectors that plug into each valve in
the system.
-
No wiring is required except for optional
input/output accessories such as flow meters,
sensors, solenoids, pumps, etc.
|
System
Types |
|
4 -
system # 4 |
Single
Unit / 9000 - 8500 Time Clock, Meter or Sensor
Regeneration |
|
5 -
System #5 |
Individual Time Clock, Meter or Sensor Interlocked
Regeneration - 2 or 3 Units |
|
6 -
System #6 |
Single
Time Clock, Meter or Sensor Series Regeneration - 2 or 3
Units |
|
7 -
System #7 |
Single
Time Clock, Meter or Sensor Alternator Regeneration - 2
or 3 Units |
|
8 -
System #8 |
Single
Time Clock, Meter or Sensor Delayed Alternator
Regeneration with Immediate Service Transfer. (No
Reserve Required) |
|
9 -
System #9 |
Individual Time Clock, or Sensor Alternator Regeneration
- 2 or 3 Units |
|
10 -
System #10 |
(System
#6 / #4) 2 Unit Single Time Clock, Meter, or Sensor
Series Regeneration System / Single Unit Time Clock,
Meter, or sensor System |
|
11 -
System #11 |
(System
#7 / #4) 2 Unit Single Time Clock, Meter or Sensor
Alternator Regeneration System / Single Unit Time Clock,
Meter, or Sensor System |
|
12 -
System #12 |
(System
#8 / #4) 2 Unit Single Time Clock, Meter or Sensor
Delayed Alternator Regeneration System / Single Unit
Time Clock, Meter or Sensor System |
|
13 -
System #13 |
(System
#9 / #4) Unit Individual Time Clock, Meter or Sensor
Alternator Regeneration System / Single Unit Time Clock,
Meter, or Sensor System. |
|
Enclosure Rating |
|
NEMA 4X
- Watertight, dust tight, corrosion resistant, suitable
for indoor or outdoor applications |
|
Electrical Rating |
|
Available in 24, 120 or 240 VAC 50/60 Hz (Total system
load not to exceed 15 amps) |
|
Temperature |
|
Operating temperature range |
32º -
120º F ( 0º - 49º C) |
|
|
